FLEXIBLE COUPLING

No other manufacturer can offer you the variety of coupling designs, sizes, and options that DODGE can. Uniquely engineered to increase bore size, improve torque capacity, speed installation, reduce maintenance, and lower your total cost of ownership, DODGE elastomeric and metallic couplings can withstand the toughest applications and processes-performing reliably and efficiently long after other couplings have failed.


Continuing our tradition of developing products that improve the performance and efficiency of your operation, DODGE is also proud to offer our D-Series Clutch Brakes and clutch/brake modules.


 FLEXIBLE COUPLING PRODUCT LIST


RIBBED RIGID
  • Rated Load Capacities of 1018 Shafting
  • Connects same diameter shafts via compres¬sion fit clamping
  • Accommodates up to 7" bores and 404,000 in. lbs.
D-FLEX
  • Available in Type J, S, B and SC Spacer Flanges:
  • Sleeves available in EFDM, Neoprene & Hytrel
  • AGMA 9 balance for Type S and SC Flanges
  • Set-screws at 65o apart offers 10% greater holding force on shaft
  • Accommodates up to 6" shafts and 72,480 in. Ibs
TAPER LOCK RIGID
  • TL Bushing connects varying diameter shaft sizes
  • Flanges are all machined, and require no maintenance
  • Accommodates up to 6" bores and 254,500 in.lbs.
POLY-DISC
  • Polyurethane flexible disc resists chemical attack
  • Allows 2o of angular misalignment & cushions shock loads
  • Accommodates up to 3-1/4" bores and 10,900 in. Ls.
PARA-FLEX
  • Industry leading misalignment (4o Angular, 1/8" Parallel & 5/16" End Float)
  • Available with Finished Bore, Taper-Lock & GRIP TIGHT flanges
  • Elements available in Standard Rubber, Neoprene & Cordless
  • Fast installation on misaligned shafts
  • Accommodates up to 8" shafts and 453,000 in. lbs.
POWERPLUS
  • Power dense elastomeric coupling
  • Low cost, low maintenance and fast installa­tion alternative to Grid and Gear Couplings
  • Accommodates up to 5.71" bores and 146,926 in. lbs.
GEAR
  • Power dense coupling
  • Interchangeable with industry standard gear couplings
  • Accommodates up to 12-1/4" bores and 1,008,400 in. lbs.
   


Page   1  2  3  4
 src=
rema_tip_top
almex_logo
martin_engineering_logo
contitech_logo
voith_logo
tru_trac_logo
etec_logo
loctite_logo
precismeca_logo
ringfeder_logo
badlor_logo
flexco_logo